Ultralight space structures utilize composite structural elements supporting active thin films in order to achieve deployed configurations with lower areal densities. However, as these space structures get larger, they get increasingly less stiff, leaving them susceptible to adverse effects, such as torsional buckling. Simultaneously, this conflicts with the requirements that more ambitious space missions impose on the surface accuracy to make technologies like large phased arrays viable.
\r\n\r\nThis thesis presents a novel method of continuously attaching thin films to deployable thin shell structures, allowing for materials with widely different coefficients of thermal expansion. It proposes a double s-spring border that exhibits a local post-buckling behavior and provides a tunable continuous edge attachment method that can maintain constant preload under large thermal strains. The mechanical behavior of the double s-spring under different mechanical loading conditions is studied both numerically and experimentally. Additionally, a reduced order model that greatly reduces the computational cost of optimizing double s-springs for various applications is presented.
\r\n\r\nIn parallel, the torsional buckling of elastic composite frames is studied to understand the fundamental limits of attaching thin films without incurring torsional buckling. This study analytically calculates the critical prestress of torsionally soft square frames supporting an internal thin film. The study highlights the role of the attachment scheme, which has a very significant impact on the critical prestress. It is shown that the average of the compression load on a frame caused by a prestress is an invariant buckling load. The analytical calculation is verified via numerical finite element analyses and an experiment, which characterizes the post-buckling behavior of the torsionally soft frames as well. It is concluded that distributed edge attachments, such as the double s-spring, significantly increase the stability of space structures against torsional buckling. The findings for the torsionally soft square frames are validated against a high fidelity orthotropic material model in order to justify the assumptions made in the analytical study.
\r\n\r\nIn the final section of the thesis, it is shown that the double s-spring continuous attachment scheme enables consistent deployment and compact packaging. The scheme is also shown to be versatile for additional applications, enabling novel deployment and folding schemes, such as a doubly-curved composite foldable toroid.
", "date": "2026", "date_type": "degree", "id_number": "CaltechTHESIS:06042026-211328312", "refereed": "FALSE", "official_url": "https://resolver.caltech.edu/CaltechTHESIS:06042026-211328312", "related_url": { "items": [ { "description": "Adapted for Chapter 2", "type": "doi", "url": "https://doi.org/10.2514/6.2026-1830" }, { "description": "Adapted for Chapter 3", "type": "doi", "url": "https://doi.org/10.2514/6.2025-0186" }, { "description": "Adapted for Chapter 5", "type": "doi", "url": "https://doi.org/10.2514/6.2026-1040" } ] }, "referencetext": { "items": [ "BIBLIOGRAPHY\r\n[1] D.A. T\u00fcrk and S. Pellegrino. Parametric design of conforming joints for thinshell coilable structures. AIAA Scitech 2019 Forum, page 1259, 2019. doi:\r\nhttps://doi.org/10.2514/6.2019-1259.\r\n[2] A Haraszti, N.H. Reddy, and S. Pellegrino. Dynamic deployment of foldable\r\ncomposite structures with pre-tensioned springs. AIAA SCITECH 2024 Forum,\r\npage 1842, 2024. doi: https://doi.org/10.2514/6.2024-1842.\r\n[3] Gokhan Kiper and Eres Soylemez. Deployable space structures. In 2009\r\n4th International conference on recent advances in space technologies, pages\r\n131\u2013138. IEEE, 2009.\r\n[4] Koryo Miura and Sergio Pellegrino. Forms and Concepts for Lightweight\r\nStructures. Cambridge University Press, Cambridge, 2020. ISBN 978-0-521-\r\n43274-0. doi: 10.1017/9781139048569.\r\n[5] X Ma, T Li, J Ma, Z Wang, C Shi, S Zheng, Q Cui, X Li, F Liu, H Guo, and\r\nL Liu. Recent advances in space-deployable structures in china. Engineering,\r\n17:207\u2013219, 2022. doi: https://doi.org/10.1016/j.eng.2022.04.013.\r\n[6] M Card and W Boyer. Large space structures-fantasies and facts. In 21st\r\nStructures, structural dynamics, and materials conference, page 674, 1980.\r\n[7] Brandi N McPherson and Jeffrey L Kauffman. Dynamics and estimation of\r\norigami-inspired deployable space structures: A review. In AIAA Scitech 2019\r\nforum, page 0480, 2019.\r\n[8] Suraj P Rawal, Mohan S Misra, and Robert G Wendt. Composite materials\r\nfor space applications. Technical report, National Aeronautics and Space\r\nAdministration, 1990.\r\n[9] E Grossman and I Gouzman. Space environment effects on polymers in low\r\nearth orbit. Nuclear Instruments and Methods in Physics Research Section B:\r\nBeam Interactions with Materials and Atoms, 208:48\u201357, 2003.\r\n[10] Charles Atkinson, Jonathan Arenberg, Larry Gilman, Ted Messer, Patty May,\r\nDave Moon, Kevin Patton, Jim York, Stan Backovsky, Jim Tucker, et al. Technology demonstration of large stable cryogenic composite structures for jwst.\r\nIn UV/Optical/IR Space Telescopes: Innovative Technologies and Concepts\r\nIII, volume 6687, pages 13\u201323. SPIE, 2007.\r\n[11] William K Wilkie. Overview of the nasa advanced composite solar sail system\r\n(acs3) technology demonstration project. In AIAA scitech 2021 forum, page\r\n1260, 2021.\r\n[12] A Fikes, M Gal-Karziri, E Gdoutos, M Kelzenberg, E Warmann, R Madonna,\r\nH Atwater, A. Hajimiri, and S. Pellegrino. The caltech space solar power\r\nproject: Design, progress, and future direction. Proc. IEEE WiSEE Space Sol.\r\nPower Workshop, pages 1\u20135, 2022.\r\n[13] Lee Feinberg, John Ziemer, Megan Ansdell, Julie Crooke, Courtney Dressing,\r\nBertrand Mennesson, John O\u2019Meara, Joshua Pepper, and Aki Roberge. The\r\nhabitable worlds observatory engineering view: status, plans, and opportunities. In Space Telescopes and Instrumentation 2024: Optical, Infrared, and\r\nMillimeter Wave, volume 13092, pages 548\u2013559. SPIE, 2024.\r\n[14] Les Johnson and Frank Curran. Solar cruiser technology maturation plans.\r\nNASA Report, 2020.\r\n[15] Oren S Mizrahi, Phillip Jahelka, Eleftherios Gdoutos, Jesse Brunet, Alex\r\nAyling, Austin Fikes, Ailec Wu, Richard Madonna, Harry A Atwater, Sergio\r\nPellegrino, et al. Space solar power generation: A viable system proposal and\r\ntechnoeconomic analysis. Joule, 9(6), 2025.\r\n[16] Volkan Gurses, Samantha I Davis, Raju Valivarthi, Neil Sinclair, Maria Spiropulu, and Ali Hajimiri. An on-chip phased array for non-classical light. Nature\r\nCommunications, 16(1):6849, 2025.\r\n[17] H. M. Y. Chinthaka Mallikarachchi and Sergio Pellegrino. Dynamic Analysis of Large Flat-foldable Arrays \u2013 Natural Frequency Bounds and Influence of Prestress. In AIAA SCITECH 2025 Forum. American Institute of\r\nAeronautics and Astronautics, 2025. doi: 10.2514/6.2025-1194. _eprint:\r\nhttps://arc.aiaa.org/doi/pdf/10.2514/6.2025-1194.\r\n[18] Todd Helwig. Lateral torsional buckling and torsional bracing of steel girder\r\nsystems. Proceedings of the Annual Stability Conference, 2025.\r\n[19] Masahiko Murozono and Earl A Thornton. Buckling and quasistatic thermalstructural response of asymmetric rolled-up solar array. Journal of spacecraft\r\nand rockets, 35(2):147\u2013155, 1998.\r\n[20] Steven A Hawley. Hubble space telescope solar array concerns and consequences for servicing mission 2. Journal of Spacecraft and Rockets, 53(1):\r\n15\u201324, 2016.\r\n[21] Bernard Budiansky. Post-buckling behavior of cylinders in torsion. In IUTAM\r\nSYMP. ON THE THEORY OF THIN SHELLS, number NASA-CR-88232,\r\n1967.\r\n[22] Earl A Thornton. Thermal buckling of plates and shells. American Society of\r\nMechanical Engineers, 1993.\r\n[23] Matthew K Chamberlain, Steven H Kiefer, and Jeremy Banik. On-orbit structural dynamics performance of the roll-out solar array. In 2018 AIAA spacecraft\r\nstructures conference, page 1942, 2018.\r\n[24] John M Pederson and Sergio Pellegrino. Thermal deformation of ultrathin\r\ncomposite structures in a vacuum environment. In AIAA SCITECH 2024\r\nForum, page 0412, 2024.\r\n[25] W. Luo and S. Pellegrino. Buckling analysis of a ladder deployable structure\r\nsupporting a prestressed film. AIAA SCITECH 2023 Forum, page 0366, 2023.\r\ndoi: https://doi.org/10.2514/6.2023-0366.\r\n[26] Wen Luo and Sergio Pellegrino. Stability of torsionally soft, deployable structures supporting prestressed membranes. Journal of Aerospace Engineering,\r\n38(5):04025069, 2025.\r\n[27] Baoyan Duan, Yiqun Zhang, and Jingli Du. Large deployable satellite antennas. Springer, 2020.\r\n[28] Devashish Dubey, Anooshe Sadat Mirhakimi, and Mohamed A Elbestawi.\r\nNegative thermal expansion metamaterials: a review of design, fabrication,\r\nand applications. Journal of Manufacturing and Materials Processing, 8(1):\r\n40, 2024.\r\n[29] Abaqus User Manual. Abaqus user manual. Abacus, 1:1, 2020.\r\n[30] Osamu Mori, Hirotaka Sawada, Ryu Funase, Mutsuko Morimoto, Tatsuya\r\nEndo, Takayuki Yamamoto, Yuichi Tsuda, Yasuhiro Kawakatsu, Jun\u2019ichiro\r\nKawaguchi, Yasuyuki Miyazaki, et al. First solar power sail demonstration by\r\nikaros. Transactions of the Japan Society for Aeronautical and Space Sciences,\r\nAerospace Technology Japan, 8(ists27):To_4_25\u2013To_4_31, 2010.\r\n[31] David A Spencer, Bruce Betts, John M Bellardo, Alex Diaz, Barbara Plante,\r\nand Justin R Mansell. The lightsail 2 solar sailing technology demonstration.\r\nAdvances in Space Research, 67(9):2878\u20132889, 2021.\r\n[32] John Moery. Development of robust thermo-optical thin-film membranes for\r\nthe james webb space telescope sunshield. In Space Telescopes and Instrumentation I: Optical, Infrared, and Millimeter, volume 6265, pages 1086\u20131095.\r\nSPIE, 2006.\r\n[33] Robert J Walters, JC Garner, SN Lam, JA Vasquez, WR Braun, RE Ruth,\r\nSR Messenger, JR Lorentzen, R Bruninga, PP Jenkins, et al. Materials on\r\nthe international space station\u2014forward technology solar cell experiment.\r\nMaterials Science and Engineering: B, 116(3):257\u2013263, 2005.\r\n[34] Rory Barrett, Doug Campbell, Mark Lake, Larry Adams, Robert Taylor, Erik\r\nAbrahamson, Mark Scherbarth, Jeffry Welsh, Gregg Freebury, Neal Beidleman, et al. Development of a passively deployed roll-out solar array. In 4th International Energy Conversion Engineering Conference and Exhibit (IECEC),\r\npage 4011, 2006.\r\n[35] James Pearson and Robert Romanofsky. Thin film antenna development and\r\noptimization. In 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 14th AIAA/ASME/AHS Adaptive Structures\r\nConference 7th, page 2229, 2006.\r\n[36] Michael Piszczor. Thin film photovoltaic blanket & array technology development within nasa. In 1st International Energy Conversion Engineering\r\nConference (IECEC), page 5921, 2003.\r\n[37] Diogo Galhofo, Nuno Silvestre, Augusto Moita de Deus, Luis Reis, Antonio PC\r\nDuarte, and Rita Carvalho. Structural behaviour of pre-tensioned solar sails.\r\nThin-Walled Structures, 181:110007, 2022.\r\n[38] Harry A Atwater, Artur R Davoyan, Ognjen Ilic, Deep Jariwala, Michelle C\r\nSherrott, Cora M Went, William S Whitney, and Joeson Wong. Materials\r\nchallenges for the starshot lightsail. Nature materials, 17(10):861\u2013867, 2018.\r\n[39] Jack Leifer, Jonathan Black, W Belvin, and Vaughn Behun. Evaluation of shear\r\ncompliant borders for wrinkle reduction in thin film membrane structures.\r\nIn 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and\r\nMaterials Conference, page 1984, 2003.\r\n[40] Jack Leifer. Simplified computational models for shear compliant borders in\r\nsolar sails. Journal of Spacecraft and Rockets, 44(3):571\u2013581, 2007.\r\n[41] Midori Isobe and Ko Okumura. Initial rigid response and softening transition\r\nof highly stretchable kirigami sheet materials. Scientific reports, 6(1):24758,\r\n2016.\r\n[42] Ahmad Rafsanjani and Katia Bertoldi. Buckling-induced kirigami. Physical\r\nreview letters, 118(8):084301, 2017.\r\n[43] DuPont. DuPont Kapton Summary of Properties, 2022.\r\n[44] Federico Benazzo, George A Popov, Juan Mejia-Ariza, and Sergio Pellegrino.\r\nDeployable composite toroid holding a circular prestressed membrane. In\r\nAIAA SCITECH 2026 Forum, 2026.\r\n[45] J. Banik and P. Hausgen. Roll-out solar arrays (rosa): Next generation flexible\r\nsolar array technology. AIAA SPACE and Astronautics Forum and Exposition,\r\npage 5307, 2017. doi: https://doi.org/10.2514/6.2017-5307.\r\n[46] E Rodgers, E Gertsen, J Sotudeh, C Mullins, A Hernandez, H Le, P. Smith,\r\nand N. Joseph. Space based solar power. NASA Report, 2024.\r\n[47] A Mukherjee, G. Risso, and 2023. Ermanni, P. Quantifying the strength of\r\nstability of multi-stable structures: A new design perspective. Thin-Walled\r\nStructures, 189, 2023. doi: https://doi.org/10.1016/j.tws.2023.110921.\r\n[48] Don O. Brush and Bo O. Almroth. Buckling of Bars, Plates, and Shells.\r\nMcGraw-Hill Book Company, US, 1 edition, 1975.\r\n[49] Robert Millard Jones. Buckling of Bars, Plates, and Shells. Bull Ridge\r\nCorporation, Blacksburg, Virginia, illustrated edition, 2006.\r\n[50] Manan Arya, Nicolas Lee, and Sergio Pellegrino. Ultralight structures for\r\nspace solar power satellites. In 3rd AIAA Spacecraft Structures Conference,\r\npage 1950, 2016.\r\n[51] Christophe Leclerc and Sergio Pellegrino. Nonlinear elastic buckling of ultrathin coilable booms. International Journal of Solids and Structures, 203:\r\n46\u201356, 2020.\r\n[52] Christophe Leclerc, Lee L Wilson, Miguel A Bessa, and Sergio Pellegrino.\r\nCharacterization of ultra-thin composite triangular rollable and collapsible\r\nbooms. In 4th AIAA spacecraft structures conference, page 0172, 2017.\r\n[53] Fabien Royer, John W Hutchinson, and Sergio Pellegrino. Probing the stability\r\nof thin-shell space structures under bending. International Journal of Solids\r\nand Structures, 257:111806, 2022.\r\n[54] Chao Xie, Zhiyi Wang, Yu Liu, Feng Gao, Li Qin, Jinping Yang, Fujun Peng,\r\nand Wujun Chen. Design and demonstration of a roll-out membrane antenna\r\nbased on thin-walled deployable composite booms. Thin-Walled Structures,\r\n205:112486, 2024.\r\n[55] Xiang Liu and Guoping Cai. Review of dynamics and active control of largescale space membrane antenna. Astrodynamics, 8(1):1\u201326, 2024.\r\n[56] Sergio Pellegrino, Harry A Atwater, Seyed Ali Hajimiri, Eleftherios E Gdoutos,\r\nChristophe Leclerc, Fabien A Royer, and Antonio Pedivellano. Coilable thinwalled longerons and coilable structures implementing longerons and methods\r\nfor their manufacture and coiling, April 25 2023. US Patent 11,634,240.\r\n[57] The Composites Store. Comparison data for pultruded shapes, Jan 2011.\r\n[58] Mitsubishi Chemical Carbon Fiber and Composites. Mitsubishi pyrofil mr,\r\nJan 2023.\r\n[59] JPS Composite Materials. Physical properties of e-glass fiber, Jul 2023.\r\n[60] North Thin Ply Technology. Ntpt tp415 data sheet, Oct 2019.\r\n[61] Meital O Carmi and Sergio Pellegrino. Manufacturing imperfections of open\r\ncross-section deployable thin-shell composite structures. In AIAA SCITECH\r\n2025 Forum, page 0189, 2025.\r\n[62] Tristan Faschinger. Integration of thin-film photovoltaics into ultralight deployable space structures. Master\u2019s thesis, ETH Zurich, 2022.\r\n[63] Charles Sommer, Eleftherios Gdoutos, Alan Truong, Alexander Wen,\r\nJonathan F Sauder, Richard Madonna, and Sergio Pellegrino. Deployable\r\non-orbit ultra-light composite experiment (dolce) on the caltech space solar\r\npower demonstration 1 (sspd-1) mission. In AIAA SCITECH 2025 Forum,\r\npage 1007, 2025.\r\n[64] Eleftherios Gdoutos, Charles F Sommer, Alan Truong, Alexander Wen, Antonio Pedivellano, Kanthasamy Ubamanyu, Richard G Madonna, and Sergio\r\nPellegrino. Development of the deployable on-orbit ultralight composite experiment (dolce) for the space solar power project demonstration mission. In\r\nAIAA SciTech 2022 Forum, page 1266, 2022.\r\n[65] Austin Fikes, E Gdoutos, M Klezenberg, Alex Ayling, O Mizrahi, Jonathan\r\nSauder, C Sommer, A Truong, Alexander Wen, A Wu, et al. The caltech\r\nspace solar power demonstration one mission. In 2022 IEEE International\r\nConference on Wireless for Space and Extreme Environments (WiSEE), pages\r\n18\u201322. IEEE, 2022.\r\n[66] Eleftherios Gdoutos, Alan Truong, Antonio Pedivellano, Fabien Royer, and\r\nSergio Pellegrino. Ultralight deployable space structure prototype. In AIAA\r\nScitech 2020 Forum, page 0692, 2020.\r\n[67] Narravula Harshavardhan Reddy and Sergio Pellegrino. Dynamics of the\r\nCaltech SSPP deployable structures: structure\u2013mechanism interaction and\r\ndeployment envelope. In AIAA SCITECH 2023 Forum. American Institute\r\nof Aeronautics and Astronautics, 2023. doi: 10.2514/6.2023-2065. _eprint:\r\nhttps://arc.aiaa.org/doi/pdf/10.2514/6.2023-2065.\r\n[68] Thomas W Murphey, William Francis, Bruce Davis, and Juan M Mejia-Ariza.\r\nHigh strain composites. In 2nd AIAA spacecraft structures conference, page\r\n0942, 2015.\r\n[69] Simon David Guest. Deployable structures: concepts and analysis. PhD\r\nthesis, University of Cambridge Cambridge, UK, 1994.\r\n[70] Sergio Pellegrino. Deployable structures in engineering. In Deployable structures, pages 1\u201335. Springer, 2001.\r\n[71] Giulia E Fenci and Neil GR Currie. Deployable structures classification: A\r\nreview. International journal of space structures, 32(2):112\u2013130, 2017.\r\n[72] Takaomi Chubachi, Hiroshi Furuya, and Hiraku Sakamoto. Boom-membrane\r\nspace structure\u2019s incomplete deployment after storage in origamisat-1 ground\r\ndemonstrator. AIAA Journal, 62(7):2401\u20132413, 2024.\r\n[73] Spinoff 1998. Thin film...large payoff. NASA Report, 1998." ] }, "projects": { "items": [ "Caltech Space Solar Power Project" ] }, "rights": "No commercial reproduction, distribution, display or performance rights in this work are provided.", "funders": { "items": [ { "agency": "Space Solar Power Project" }, { "agency": "2024 R&TD Innovative Spontaneous Concept", "grant_number": "Task #R24231" }, { "agency": "Graduate Aerospace Laboratories of the California Institute of Technology (GALCIT)" } ] }, "collection": "CaltechTHESIS", "reviewer": "Kathy Johnson", "local_group": { "items": [ "GALCIT", "Space Solar Power Project" ] }, "suggestions": "No embargo requested.\r\n\r\nTemporary 1-week embargo until 12 June 2026.", "deposited_by": "George Popov", "deposited_on": "2026-06-05 20:05:46", "doi": "10.7907/0n4d-3v80", "divisions": { "items": [ "div_eng" ] }, "institution": "California Institute of Technology", "thesis_type": "phd", "thesis_advisor": { "items": [ { "email": "sergiop@caltech.edu", "id": "Pellegrino-S", "name": { "family": "Pellegrino", "given": "Sergio" }, "orcid": "0000-0001-9373-3278", "role": "advisor" } ] }, "thesis_committee": { "items": [ { "email": "dim@caltech.edu", "id": "Meiron-D-I", "name": { "family": "Meiron", "given": "Daniel I." }, "orcid": "0000-0003-0397-3775", "role": "chair" }, { "email": "bhatta@caltech.edu", "id": "Bhattacharya-K", "name": { "family": "Bhattacharya", "given": "Kaushik" }, "orcid": "0000-0003-2908-5469", "role": "member" }, { "email": "sergiop@caltech.edu", "id": "Pellegrino-S", "name": { "family": "Pellegrino", "given": "Sergio" }, "orcid": "0000-0001-9373-3278", "role": "member" }, { "email": "angkur@caltech.edu", "id": "Shaikeea-Angkur-J", "name": { "family": "Shaikeea", "given": "Angkur" }, "orcid": "0000-0002-6706-0492", "role": "member" } ] }, "thesis_degree": "PHD", "thesis_degree_grantor": "California Institute of Technology", "thesis_defense_date": "2026-05-21", "gradofc_approval_date": "2026-06-05", "review_status": "approved", "option_major": { "items": [ "aerospace", "space" ] }, "copyright_statement": "Author's Rights Authorization: I hereby certify that, if appropriate, I have obtained a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted here is the same as that approved by my advisory committee.\n\nI hereby grant to California Institute of Technology or its agents the non-exclusive license to archive and make accessible, under the conditions specified under \"Thesis Availability\" in this submission, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation, or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.", "pub_year": "2026", "author_list": "Popov, George Arthur" }, { "id": "/id/eprint/17800", "eprint_id": 17800, "rev_number": 53, "documents": [ { "id": "/id/document/171947", "doc_id": 171947, "rev_number": 7, "files": [ { "id": "/id/file/496691", "fileid": 496691, "datasetid": "document", "objectid": 171947, "filename": "Sara_Anjum_LaTeX_Thesis.pdf", "mime_type": "application/pdf", "hash": "a2bae6702527a0bebcf6452e051670f0", "hash_type": "MD5", "filesize": 117269797, "mtime": "2026-04-20 18:27:25", "url": "/17800/3/Sara_Anjum_LaTeX_Thesis.pdf" } ], "eprint_id": 17800, "pos": 3, "placement": 3, "mime_type": "application/pdf", "format": "application/pdf", "format_desc": "original uploaded copy. LaTeX files for thesis", "language": "en", "security": "internal", "license": "other", "main": "Sara_Anjum_LaTeX_Thesis.pdf", "media_duration": "0", "media_aspect_ratio": "0", "media_sample_start": "0", "media_sample_stop": "0", "content": "final" }, { "id": "/id/document/171948", "doc_id": 171948, "rev_number": 1, "files": [ { "id": "/id/file/496694", "fileid": 496694, "datasetid": "document", "objectid": 171948, "filename": "indexcodes.txt", "mime_type": "text/plain", "hash": "34c018a3db4b06f5032f1bef4bdecbcc", "hash_type": "MD5", "filesize": 39811, "mtime": "2026-04-20 18:37:46", "url": "/17800/4/indexcodes.txt" } ], "eprint_id": 17800, "pos": 4, "placement": 4, "mime_type": "text/plain", "format": "other", "format_desc": "Generate index codes conversion from application/pdf to indexcodes", "language": "en", "security": "public", "license": "other", "main": "indexcodes.txt", "media_duration": "0", "media_aspect_ratio": "0", "media_sample_start": "0", "media_sample_stop": "0", "relation": { "items": [ { "type": "http://eprints.org/relation/isVersionOf", "uri": "/id/document/171947" }, { "type": "http://eprints.org/relation/isVolatileVersionOf", "uri": "/id/document/171947" }, { "type": "http://eprints.org/relation/isIndexCodesVersionOf", "uri": "/id/document/171947" } ] } }, { "id": "/id/document/172136", "doc_id": 172136, "rev_number": 4, "files": [ { "id": "/id/file/497602", "fileid": 497602, "datasetid": "document", "objectid": 172136, "filename": "Sara_Anjum_LaTeX_Thesis_May_2026.zip", "mime_type": "application/zip", "hash": "ba53251fd8d53615146de5854b92566c", "hash_type": "MD5", "filesize": 244297661, "mtime": "2026-05-01 16:06:40", "url": "/17800/5/Sara_Anjum_LaTeX_Thesis_May_2026.zip" } ], "eprint_id": 17800, "pos": 5, "placement": 2, "mime_type": "application/zip", "format": "application/zip", "format_desc": "Source Files", "language": "en", "security": "internal", "license": "other", "main": "Sara_Anjum_LaTeX_Thesis_May_2026.zip", "media_duration": "0", "media_aspect_ratio": "0", "media_sample_start": "0", "media_sample_stop": "0", "content": "archival" }, { "id": "/id/document/172137", "doc_id": 172137, "rev_number": 4, "files": [ { "id": "/id/file/497604", "fileid": 497604, "datasetid": "document", "objectid": 172137, "filename": "Anjum_Sara_2026.pdf", "mime_type": "application/pdf", "hash": "214ae83d6587119efd5976b6098ba75c", "hash_type": "MD5", "filesize": 115313890, "mtime": "2026-05-01 16:07:42", "url": "/17800/6/Anjum_Sara_2026.pdf" } ], "eprint_id": 17800, "pos": 6, "placement": 1, "mime_type": "application/pdf", "format": "application/pdf", "language": "en", "security": "public", "license": "other", "main": "Anjum_Sara_2026.pdf", "media_duration": "0", "media_aspect_ratio": "0", "media_sample_start": "0", "media_sample_stop": "0", "content": "final" }, { "id": "/id/document/172138", "doc_id": 172138, "rev_number": 1, "files": [ { "id": "/id/file/497607", "fileid": 497607, "datasetid": "document", "objectid": 172138, "filename": "indexcodes.txt", "mime_type": "text/plain", "hash": "cb00f1bfb2c326d3fc76fb0aa26addf2", "hash_type": "MD5", "filesize": 39654, "mtime": "2026-05-01 16:16:52", "url": "/17800/7/indexcodes.txt" } ], "eprint_id": 17800, "pos": 7, "placement": 7, "mime_type": "text/plain", "format": "other", "format_desc": "Generate index codes conversion from application/pdf to indexcodes", "language": "en", "security": "public", "license": "other", "main": "indexcodes.txt", "media_duration": "0", "media_aspect_ratio": "0", "media_sample_start": "0", "media_sample_stop": "0", "relation": { "items": [ { "type": "http://eprints.org/relation/isVersionOf", "uri": "/id/document/172137" }, { "type": "http://eprints.org/relation/isVolatileVersionOf", "uri": "/id/document/172137" }, { "type": "http://eprints.org/relation/isIndexCodesVersionOf", "uri": "/id/document/172137" } ] } } ], "eprint_status": "archive", "userid": 13840, "dir": "disk0/00/01/78/00", "datestamp": "2026-05-06 16:46:52", "lastmod": "2026-06-08 17:30:50", "status_changed": "2026-05-06 16:46:52", "type": "thesis", "metadata_visibility": "show", "creators": { "items": [ { "email": "sanjum@alumni.princeton.edu", "id": "Anjum-Sara", "name": { "family": "Anjum", "given": "Sara" }, "orcid": "0009-0006-6639-4710", "show_email": "NO" } ] }, "title": "Towards Sustainable, Scalable, Low-Cost InP Space Solar Power", "ispublished": "unpub", "full_text_status": "public", "keywords": "solar, cells, photovoltaics, indium, phosphide, diffusion, doping, nanowires, low cost, space, power", "abstract": "The world needs clean, sustainable, and consistent sources of power. Solar energy is an attractive source of renewable power, but energy storage is a challenge for intermittent sources like solar and wind. The massive reduction in space launch costs now makes the prospect of space solar power as a 24/7, consistent baseline source of clean power more of a viable possibility than before. Solar cells designed\r\nto provide power for Earth while in space must not only be low cost and efficient but also light and maintain their performance in harsh space environments, especially in extreme temperature conditions while being subject to damaging space radiation.
\r\n\r\nThis thesis explores two different approaches to achieving radiation hardness: using nanowire solar cells instead of planar cells and using thin-film diffusion-doped cells. It does so with cells made of indium phosphide (InP), which is inherently more resilient to damage from space radiation than materials like silicon (Si) and gallium arsenide (GaAs). The performance of diffusion-doped planar cells is compared to\r\nepitaxially-grown solar cells as a baseline.
\r\n\r\nNanowire cells were simulated in Lumerical to understand the light-trapping properties compared to planar cells with and without surface texturing that also enhances light absorption. The nanowires were simulated with and without hemispherical nanoparticles to enhance light absorption while maintaining a transparent conducting top layer to adequately transport the generated electricity. Nanowire and planar\r\ncells were further simulated in Sentaurus to predict their electrical performance. Nanowire fabrication was attempted as well, but reliable, consistent fabrication was challenging. Given the cost and scalability challenges of this approach, the rest of the work pivots to planar cells.
\r\n\r\nEpitaxially-grown InP cells optimized using Sentaurus were fabricated as a baseline and to work out fabrication challenges adjacent to the p-n junction formation itself. Then, diffusion-doped InP cells were fabricated using Cd\u2083P\u2082 and Zn\u2083P\u2082 as p-type dopants on undoped InP substrates. Preliminary cell performance optimzation was conducted by adjusting diffusion temperatures and times as well as thinning the emitter layer. Efficiencies of up to 4.94% were achieved in Cd-doped cells and up to 3.85% were achieved in Zn-doped cells without anti-reflection coatings, with a maximum JSC of 11.33 mA/cm\u00b2 and a maximum VOC of 778.1 mV in 100 nm thinned Zn-doped cells.
", "date": "2026", "date_type": "degree", "id_number": "CaltechTHESIS:12152025-200604749", "refereed": "FALSE", "official_url": "https://resolver.caltech.edu/CaltechTHESIS:12152025-200604749", "related_url": { "items": [ { "description": "Adapted for Chapter 2", "type": "doi", "url": "https://doi.org/10.1109/PVSC48317.2022.9938933" }, { "description": "Adapted for Chapter 4", "type": "doi", "url": "https://doi.org/10.1109/PVSC57443.2024.10749655" }, { "description": "Adapted for Chapter 4", "type": "doi", "url": "https://doi.org/10.1109/PVSC59419.2025.11133166" } ] }, "rights": "No commercial reproduction, distribution, display or performance rights in this work are provided.", "funders": { "items": [ { "agency": "Space Solar Power Project" } ] }, "collection": "CaltechTHESIS", "reviewer": "Kathy Johnson", "local_group": { "items": [ "Space Solar Power Project" ] }, "suggestions": "Released to public view 8 June 2026.", "deposited_by": "Sara Anjum", "deposited_on": "2026-05-06 16:46:52", "doi": "10.7907/rhn1-n250", "divisions": { "items": [ "div_eng" ] }, "institution": "California Institute of Technology", "thesis_type": "engd", "thesis_advisor": { "items": [ { "email": "haa@caltech.edu", "id": "Atwater-H-A", "name": { "family": "Atwater", "given": "Harry Albert" }, "orcid": "0000-0001-9435-0201", "role": "advisor" } ] }, "thesis_committee": { "items": [ { "email": "btf@caltech.edu", "id": "Fultz-B-T", "name": { "family": "Fultz", "given": "Brent T." }, "orcid": "0000-0002-6364-8782", "role": "chair" }, { "email": "schwab@caltech.edu", "id": "Schwab-K-C", "name": { "family": "Schwab", "given": "Keith C." }, "orcid": "0000-0001-8216-4815", "role": "member" }, { "email": "wag@caltech.edu", "id": "Goddard-W-A-III", "name": { "family": "Goddard", "given": "William A., III" }, "orcid": "0000-0003-0097-5716", "role": "member" }, { "email": "haa@caltech.edu", "id": "Atwater-H-A", "name": { "family": "Atwater", "given": "Harry Albert" }, "orcid": "0000-0001-9435-0201", "role": "member" } ] }, "thesis_degree": "Engineer", "thesis_degree_grantor": "California Institute of Technology", "thesis_defense_date": "2026-01-16", "gradofc_approval_date": "2026-05-05", "review_status": "approved", "option_major": { "items": [ "matsci" ] }, "copyright_statement": "Author's Rights Authorization: I hereby certify that, if appropriate, I have obtained a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted here is the same as that approved by my advisory committee.\n\nI hereby grant to California Institute of Technology or its agents the non-exclusive license to archive and make accessible, under the conditions specified under \"Thesis Availability\" in this submission, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation, or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.", "pub_year": "2026", "author_list": "Anjum, Sara" } ]